50ft spray stream height reaches the top of trees
Sunday, 13 December 2015
Friday, 4 December 2015
Menghadapi masalah penyembur tangki?
Small tank, feeling tired to refill the tank regularly
.小水箱,时常要注水,感觉厌倦。
.小水箱,时常要注水,感觉厌倦。
Tangki besar, susah dibawa.
Big tank, heavy to carry.
大水箱, 携带困难,感觉疲惫。
Zenoah EBZ8500 tidak ada masalah tangki kapasiti, angin yang kuat boleh menyembur kawasan yang lebih luas dan tempat yang sukar dicapai, seperti pokok yang tinggi.
Zenoah EBZ8500 has no tank capacity problem, large air volume that can cover a bigger area and able to propel the fine droplets to the area that is difficult to reach, such as the tall tree.
Zenoah EBZ8500 没有水箱容量的问题,大风量覆盖范围比较大,也可以把微雾带到难以达到的地方,比如高大的树。
EBZ8500 mempercepatkan kerja penyemburan anda.
EBZ8500 can help you speed up the spraying job.
EBZ8500 可以提升你的喷雾效率。
EBZ8500 can help you speed up the spraying job.
EBZ8500 可以提升你的喷雾效率。
Layari laman web kami unutk maklumat lanjut
Visit our company website for more information.
游览我们的公司网站以了解更多详情
Monday, 7 September 2015
Environmental dust is a health hazard
Air pollution has come under spotlight this month. Environmental dust generated from industrial process, construction and opening burning lead to severe reduction of air quality and can be a significant health hazard.
Dust suppression is a cost effective way to reduce dust levels in open or/and large area. Misting system atomize water into the air captures airborne particles of dust, leading them to the ground without getting wet.
Benefit of misting system:
Dust suppression is a cost effective way to reduce dust levels in open or/and large area. Misting system atomize water into the air captures airborne particles of dust, leading them to the ground without getting wet.
Benefit of misting system:
- Reduce unpleasant odors.
- Improve air quality
- Increase productivity with comfort working environment.
- Save money by reducing site maintenance, clean-up costs and equipment wear.
Wuli high pressure misting system produce micron droplets capable of capturing dust particles through this process of agglomeration.
Find out more Wuli high pressure misting system via Yie Hong, Malaysia - Misting system
Wednesday, 19 August 2015
How to operate and maintain a high pressure pump?
A. Before operate
1. Make sure that the high-pressure pump and motor (or engine) are firmly installed on the frame.
2. Fasten the suction hose connector to the water inlet of the pump securely in order to prevent air leaking into the pump. Leave the filter end of the suction hose submersed in the water tank.
3. For pumps with an external overflow, connect the overflow hose to the overflow outlet on the pressure regulative valve.
4. Check whether the motor is plugged into an electrical supply with the appropriate voltage. For engines, make sure the gasoline and engine oil are sufficient.
5. Limit all electrical power cable to maximum of 10 meters (30 feet).
6. Make sure the water supply is clean.
7. Limit the height difference between the pump and water tank to a maximum of 1.3 meters (4 feet).
B. During operation
1. Always use clean water.
2. In order to prime the pump, begin running the pump and stop it once the water is flowing smoothly.
3. Connect the high-pressure spray gun to the pump, start the pump and switch on the high-pressure gun. Adjust the pressure of the pump using the pressure-regulating valve.
4. Do not switch off the high-pressure gun before the engine or motor stops.
C. Maintenance
1. Replace the oil in the pump after the first 50 hours of use, Thereafter, replace the oil after every 100 hours of use. Always use oil type #30 or #40.
2. To drain out the old oil, loosen the drainage screw.
3. Refasten the drainage screw and open the oil inlet cover to fill the oil.
4. Lubricate the pistons after every 8 hours of use by adding on drop of oil into each of the inlets above the pistons.
D. Troubleshooting
1. Unstable working pressure and water supply
a. Check whether the suction hose is leaking, clogged or afloat.
b. Drain the excess air by switching on the high-pressure gun or opening the air release valve.
c. Remove the set bolts containing the valves. Check whether vales are stuck or damaged.
2. Insufficient pressure
a. Check whether the pressure can be adjusted using the pressure-regulating valve.
b. Check whether the revolution of the engine or motor is at the proper speed.
c. Check the conditions of the high-pressure spray gun and nozzle.
d. Check whether the overflow volume is too much. If so, remove the unloader and check if the vale seat and pressure valve are worn out.
e. Check the conditions of the adjusting rings, pistons and waterproof seals.
Welcome to visit our website: www.yiehongsb.com
1. Make sure that the high-pressure pump and motor (or engine) are firmly installed on the frame.
2. Fasten the suction hose connector to the water inlet of the pump securely in order to prevent air leaking into the pump. Leave the filter end of the suction hose submersed in the water tank.
3. For pumps with an external overflow, connect the overflow hose to the overflow outlet on the pressure regulative valve.
4. Check whether the motor is plugged into an electrical supply with the appropriate voltage. For engines, make sure the gasoline and engine oil are sufficient.
5. Limit all electrical power cable to maximum of 10 meters (30 feet).
6. Make sure the water supply is clean.
7. Limit the height difference between the pump and water tank to a maximum of 1.3 meters (4 feet).
B. During operation
1. Always use clean water.
2. In order to prime the pump, begin running the pump and stop it once the water is flowing smoothly.
3. Connect the high-pressure spray gun to the pump, start the pump and switch on the high-pressure gun. Adjust the pressure of the pump using the pressure-regulating valve.
4. Do not switch off the high-pressure gun before the engine or motor stops.
C. Maintenance
1. Replace the oil in the pump after the first 50 hours of use, Thereafter, replace the oil after every 100 hours of use. Always use oil type #30 or #40.
2. To drain out the old oil, loosen the drainage screw.
3. Refasten the drainage screw and open the oil inlet cover to fill the oil.
4. Lubricate the pistons after every 8 hours of use by adding on drop of oil into each of the inlets above the pistons.
D. Troubleshooting
1. Unstable working pressure and water supply
a. Check whether the suction hose is leaking, clogged or afloat.
b. Drain the excess air by switching on the high-pressure gun or opening the air release valve.
c. Remove the set bolts containing the valves. Check whether vales are stuck or damaged.
2. Insufficient pressure
a. Check whether the pressure can be adjusted using the pressure-regulating valve.
b. Check whether the revolution of the engine or motor is at the proper speed.
c. Check the conditions of the high-pressure spray gun and nozzle.
d. Check whether the overflow volume is too much. If so, remove the unloader and check if the vale seat and pressure valve are worn out.
e. Check the conditions of the adjusting rings, pistons and waterproof seals.
Welcome to visit our website: www.yiehongsb.com
How to operate and maintain a mist pump?
A.
Before
operation
1. Make sure that the pump is firmly
installed and the connectors are tightened properly.
2.
Before operating the motor, turn
on the tap water and check whether the suction hose is connected to the pump
properly. Discharge redundant air inside the pump.
3.
The volume of tap water should be
at leave 10 l/min.
4.
Make sure the diameter of the
suction hose is larger than 5/8 inch.
5. Make sure the diameter of any
extension cords used is larger than 2mm2.
B.
Maintenance
1.
Change the oil when the pump has
been used for the first 30 ~ 50 hours.
2.
Then, change the oil after every
100 ~ 200 hours.
3.
Use #30 ~ 40~ oil, add 250cc each
time.
C.
Troubleshooting
1.
Unstable working
pressure
· Check whether the suction hose is
leaking, clogged or afloat.
· Drain out the redundant air by
disconnecting the outlet hose.
· Check the valve assembly to see
if it is clogged or damaged.
2.
Insufficient
pressure
· Check to see if the packing,
waterproof seal and valve assembly are damaged.
· Check to see if the pressure
valve and regulating spring are worn out.
3.
Leakage
· Check the U-packing, waterproof
seal and piston. Replace them if necessary.
4.
Unusual noise
· Check the piston and oil. Replace
them if necessary.
· Check the volume of tap water.
· Check whether the nozzle is
clogged.
Welcome to visit our website: YIE HONG SDN. BHD.
Tuesday, 18 August 2015
High quality high pressure cleaner
Mobile high pressure cleaner designed for tough daily use by fleet operator, factory cleaner and contractor. Petrol driven high pressure cleaner is very useful when there is no main electric available.
Wuli high pressure cleaner used in MRT construction project, port cleaning and factory cleaning. With more than 20 years experience in this industry, Wuli water pump have earned a reputation for unsurpassed reliability and performance.
We have wide range high pressure pump from 1,000 p.s.i to 4,000 p.s.i.
Welcome visit our website: Yie Hong Sdn. Bhd.
Wuli high pressure cleaner used in MRT construction project, port cleaning and factory cleaning. With more than 20 years experience in this industry, Wuli water pump have earned a reputation for unsurpassed reliability and performance.
We have wide range high pressure pump from 1,000 p.s.i to 4,000 p.s.i.
Welcome visit our website: Yie Hong Sdn. Bhd.
High pressure cleaner powered by Honda engine |
High pressure cleaner powered by motor |
Saturday, 25 July 2015
YIE HONG facebook
Finally, we created our own Facebook page.
We are welcome to visit and like our Facebook page by click link below.
YIE HONG Face book
Wednesday, 15 July 2015
Zenoah: Combi Trimmer EX2600
Presenting a combination trimmer with split-boom attachments!!
Work your whole garden with one machine.
Work your whole garden with one machine.
Buy 1 Use 4
Save Cost, Save Place
Visit our company website for more details
Tuesday, 14 July 2015
Rover: Lawn mower / Ride-on
With significant presence in international markets, Rover is one of the leading brands for lawn mower and ride-on. The Rover brand's success reflects its high efficiency grass catching and mulching designs and an enviable reputation for product reliability.
Good news to Malaysia lawn lovers, we bring in 18" lawn mower and 2 types riding lawn mower. Honestly, there are no best lawn mower can fit everyone , but we can offer a good lawn mower suit to your needs and worth for value.
Welcome to visit our website: http://www.yiehongsb.com
Thursday, 2 July 2015
Best Grease Free Power Sprayer for farmer 免黄油动力喷雾机
Grease-free power sprayer pumps leave no traces of oil on plants for healthier consumption; providing longer service life and requiring minimal maintenance.
- Grease-free operation ensures pumps reliability without the need to refill grease cups.
- Stable output pressure despite changes in output.
- Durable packings for longer product life and greater efficiency.
- Ceramic pressure valve and valve seat.
- Industrial ceramic piston.
- Automatic pressure release device releases pressure to save energy.
- Power spraying: Ideal for spraying agricultural chemicals and fertilizers on farms, greenhouses and orchards.
- Water transport: Capable of pumping liquids up to 3 km over flat ground, or 400 m at a 60 degree incline.
- Irrigation: Provide water to crops in dry areas.
- Disinfectant spraying: Used for spraying chemical disinfectant for sanitary applications.
Specification:
Suction volume: 32l/min
Working pressure: 50bar
Dimension: L40 x W31 x H37 cm
Weight: 17kg
Visit our website for more choices, YIE HONG - Power Sprayer
Rover: ebay Top 5 Riding Mower for Novice - Mini Rider 30"
Regular maintenance a lawn at home is not a easy task, so it would be a good idea to invest in a good lawn mower to keep your lawn neat and tidy. There are a number of options on the market for you to choose from.
ROVER Ride-on Mowers is one of the best riding lawn mower for demanding homeowner who want efficient and reliable machine.
ROVER Mini Rider was selected by ebay one to the Top 5 riding mower for beginner.
1. Rover Mini Rider
The Rover Mini Rider is an excellent choice for any novice with a lawn that is just a little bit too large to mow on foot. This is a small and simple design with a control scheme that is familiar to anyone who can drive a car. It offers both bagging and mulching options, and it has a 76 cm cutting deck. The small size makes it easy to manoeuvre, but buyers should be aware that it is not designed for heavy use, and it is not recommended for anyone with a lawn size of more than a hectare. This Rover also makes a good entry-level model for someone who could probably mow with a push mower but wants something to make it a little easier.
Website: http://www.yiehongsb.com
Thursday, 25 June 2015
WULI: Which power sprayer suit to you?
With the wide range of power sprayer available, choosing the most suitable sprayer is often difficult. Since most power sprayer is designed to cover a variety of conditions, each sprayer has different advantages and features. The best sprayer for one farm may not necessarily be the best for another. No single sprayer will best fill the needs of all farmers. Choosing power sprayer is therefore a compromise among the advantages, features and costs of the different sprayer.
Find a most suitable power sprayer based on your need.
Welcome to visit our company website: http://www.yiehongsb.com/
Monday, 25 May 2015
Monday, 23 March 2015
Blower: STIHL BR vs ECHO vs Zenoah EB
These 4 models are available in Malaysia:
1. EBZ5100 : 50.2cc 9.4kg
2. < EB6200 > : 62.0cc 8.6kg
3. < EBZ7500 > : 65.6cc 10.5kg
4. < EBZ8500 > : 75.6cc 11.1kg
How about handheld blower? Yes. Our handheld blower < HB2302 > only 3.7kg with 22.5cc.
** Redmax is brand name used in USA.
In Japan and Malaysia, we call it < ZENOAH >.
Feel free to contact us if you need more information, yiehongm@yahoo.com/ +603-7785-5369 or look for our dealer. We have more than 100 dealers in Malaysia. No need worry about after-sales service.
Welcome to our website: http://www.yiehongsb.com
Tuesday, 17 March 2015
Combination Trimmer: EX2600
Commercial Trimmer with split-boom attachments! Zeoah's combination trimmer is composed of the power unit "EX2600" and 2 attachments. It handles a variety of greenery jobs, and its disassembling design allows it to be easily stored or transported in the boot of a car.
Hedge trimmer attachment
Blade type: Dual (28T x 30)
Blade length: 400mm
Angle: 90 degree
Edger attachment
Blade length: 200mm
Angle: 90 degree
Subscribe to:
Posts (Atom)