Visit our website for more information. Yie Hong
Tuesday, 5 January 2016
Sunday, 13 December 2015
Friday, 4 December 2015
Menghadapi masalah penyembur tangki?
Small tank, feeling tired to refill the tank regularly
.小水箱，时常要注水，感觉厌倦。
.小水箱，时常要注水，感觉厌倦。
Tangki besar, susah dibawa.
Big tank, heavy to carry.
大水箱, 携带困难，感觉疲惫。
Zenoah EBZ8500 tidak ada masalah tangki kapasiti, angin yang kuat boleh menyembur kawasan yang lebih luas dan tempat yang sukar dicapai, seperti pokok yang tinggi.
Zenoah EBZ8500 has no tank capacity problem, large air volume that can cover a bigger area and able to propel the fine droplets to the area that is difficult to reach, such as the tall tree.
Zenoah EBZ8500 没有水箱容量的问题，大风量覆盖范围比较大，也可以把微雾带到难以达到的地方，比如高大的树。
EBZ8500 mempercepatkan kerja penyemburan anda.
EBZ8500 can help you speed up the spraying job.
EBZ8500 可以提升你的喷雾效率。
EBZ8500 can help you speed up the spraying job.
EBZ8500 可以提升你的喷雾效率。
Layari laman web kami unutk maklumat lanjut
Visit our company website for more information.
游览我们的公司网站以了解更多详情
Monday, 7 September 2015
Environmental dust is a health hazard
Air pollution has come under spotlight this month. Environmental dust generated from industrial process, construction and opening burning lead to severe reduction of air quality and can be a significant health hazard.
Dust suppression is a cost effective way to reduce dust levels in open or/and large area. Misting system atomize water into the air captures airborne particles of dust, leading them to the ground without getting wet.
Benefit of misting system:
Dust suppression is a cost effective way to reduce dust levels in open or/and large area. Misting system atomize water into the air captures airborne particles of dust, leading them to the ground without getting wet.
Benefit of misting system:
- Reduce unpleasant odors.
- Improve air quality
- Increase productivity with comfort working environment.
- Save money by reducing site maintenance, clean-up costs and equipment wear.
Wuli high pressure misting system produce micron droplets capable of capturing dust particles through this process of agglomeration.
Find out more Wuli high pressure misting system via Yie Hong, Malaysia - Misting system
Wednesday, 19 August 2015
How to operate and maintain a high pressure pump?
A. Before operate
1. Make sure that the high-pressure pump and motor (or engine) are firmly installed on the frame.
2. Fasten the suction hose connector to the water inlet of the pump securely in order to prevent air leaking into the pump. Leave the filter end of the suction hose submersed in the water tank.
3. For pumps with an external overflow, connect the overflow hose to the overflow outlet on the pressure regulative valve.
4. Check whether the motor is plugged into an electrical supply with the appropriate voltage. For engines, make sure the gasoline and engine oil are sufficient.
5. Limit all electrical power cable to maximum of 10 meters (30 feet).
6. Make sure the water supply is clean.
7. Limit the height difference between the pump and water tank to a maximum of 1.3 meters (4 feet).
B. During operation
1. Always use clean water.
2. In order to prime the pump, begin running the pump and stop it once the water is flowing smoothly.
3. Connect the high-pressure spray gun to the pump, start the pump and switch on the high-pressure gun. Adjust the pressure of the pump using the pressure-regulating valve.
4. Do not switch off the high-pressure gun before the engine or motor stops.
C. Maintenance
1. Replace the oil in the pump after the first 50 hours of use, Thereafter, replace the oil after every 100 hours of use. Always use oil type #30 or #40.
2. To drain out the old oil, loosen the drainage screw.
3. Refasten the drainage screw and open the oil inlet cover to fill the oil.
4. Lubricate the pistons after every 8 hours of use by adding on drop of oil into each of the inlets above the pistons.
D. Troubleshooting
1. Unstable working pressure and water supply
a. Check whether the suction hose is leaking, clogged or afloat.
b. Drain the excess air by switching on the high-pressure gun or opening the air release valve.
c. Remove the set bolts containing the valves. Check whether vales are stuck or damaged.
2. Insufficient pressure
a. Check whether the pressure can be adjusted using the pressure-regulating valve.
b. Check whether the revolution of the engine or motor is at the proper speed.
c. Check the conditions of the high-pressure spray gun and nozzle.
d. Check whether the overflow volume is too much. If so, remove the unloader and check if the vale seat and pressure valve are worn out.
e. Check the conditions of the adjusting rings, pistons and waterproof seals.
Welcome to visit our website: www.yiehongsb.com
1. Make sure that the high-pressure pump and motor (or engine) are firmly installed on the frame.
2. Fasten the suction hose connector to the water inlet of the pump securely in order to prevent air leaking into the pump. Leave the filter end of the suction hose submersed in the water tank.
3. For pumps with an external overflow, connect the overflow hose to the overflow outlet on the pressure regulative valve.
4. Check whether the motor is plugged into an electrical supply with the appropriate voltage. For engines, make sure the gasoline and engine oil are sufficient.
5. Limit all electrical power cable to maximum of 10 meters (30 feet).
6. Make sure the water supply is clean.
7. Limit the height difference between the pump and water tank to a maximum of 1.3 meters (4 feet).
B. During operation
1. Always use clean water.
2. In order to prime the pump, begin running the pump and stop it once the water is flowing smoothly.
3. Connect the high-pressure spray gun to the pump, start the pump and switch on the high-pressure gun. Adjust the pressure of the pump using the pressure-regulating valve.
4. Do not switch off the high-pressure gun before the engine or motor stops.
C. Maintenance
1. Replace the oil in the pump after the first 50 hours of use, Thereafter, replace the oil after every 100 hours of use. Always use oil type #30 or #40.
2. To drain out the old oil, loosen the drainage screw.
3. Refasten the drainage screw and open the oil inlet cover to fill the oil.
4. Lubricate the pistons after every 8 hours of use by adding on drop of oil into each of the inlets above the pistons.
D. Troubleshooting
1. Unstable working pressure and water supply
a. Check whether the suction hose is leaking, clogged or afloat.
b. Drain the excess air by switching on the high-pressure gun or opening the air release valve.
c. Remove the set bolts containing the valves. Check whether vales are stuck or damaged.
2. Insufficient pressure
a. Check whether the pressure can be adjusted using the pressure-regulating valve.
b. Check whether the revolution of the engine or motor is at the proper speed.
c. Check the conditions of the high-pressure spray gun and nozzle.
d. Check whether the overflow volume is too much. If so, remove the unloader and check if the vale seat and pressure valve are worn out.
e. Check the conditions of the adjusting rings, pistons and waterproof seals.
Welcome to visit our website: www.yiehongsb.com
How to operate and maintain a mist pump?
A.
Before
operation
1. Make sure that the pump is firmly
installed and the connectors are tightened properly.
2.
Before operating the motor, turn
on the tap water and check whether the suction hose is connected to the pump
properly. Discharge redundant air inside the pump.
3.
The volume of tap water should be
at leave 10 l/min.
4.
Make sure the diameter of the
suction hose is larger than 5/8 inch.
5. Make sure the diameter of any
extension cords used is larger than 2mm2.
B.
Maintenance
1.
Change the oil when the pump has
been used for the first 30 ~ 50 hours.
2.
Then, change the oil after every
100 ~ 200 hours.
3.
Use #30 ~ 40~ oil, add 250cc each
time.
C.
Troubleshooting
1.
Unstable working
pressure
· Check whether the suction hose is
leaking, clogged or afloat.
· Drain out the redundant air by
disconnecting the outlet hose.
· Check the valve assembly to see
if it is clogged or damaged.
2.
Insufficient
pressure
· Check to see if the packing,
waterproof seal and valve assembly are damaged.
· Check to see if the pressure
valve and regulating spring are worn out.
3.
Leakage
· Check the U-packing, waterproof
seal and piston. Replace them if necessary.
4.
Unusual noise
· Check the piston and oil. Replace
them if necessary.
· Check the volume of tap water.
· Check whether the nozzle is
clogged.
Welcome to visit our website: YIE HONG SDN. BHD.
Tuesday, 18 August 2015
High quality high pressure cleaner
Mobile high pressure cleaner designed for tough daily use by fleet operator, factory cleaner and contractor. Petrol driven high pressure cleaner is very useful when there is no main electric available.
Wuli high pressure cleaner used in MRT construction project, port cleaning and factory cleaning. With more than 20 years experience in this industry, Wuli water pump have earned a reputation for unsurpassed reliability and performance.
We have wide range high pressure pump from 1,000 p.s.i to 4,000 p.s.i.
Welcome visit our website: Yie Hong Sdn. Bhd.
Wuli high pressure cleaner used in MRT construction project, port cleaning and factory cleaning. With more than 20 years experience in this industry, Wuli water pump have earned a reputation for unsurpassed reliability and performance.
We have wide range high pressure pump from 1,000 p.s.i to 4,000 p.s.i.
Welcome visit our website: Yie Hong Sdn. Bhd.
 |
| High pressure cleaner powered by Honda engine |
 |
| High pressure cleaner powered by motor |
Subscribe to:
Posts (Atom)